Gloss Brick Sealer

What is gloss brick sealer and how does it work

Gloss brick sealer is a wonderful material for adding a brilliant shine to your brick slip wall feature.

Glossy vs. matte is a contentious issue that may be confusing for many individuals, according to most people. However, the glossy vs. matte debate can get complicated beyond looks. What are some things to think about when selecting one finish over another?

So, what is a gloss brick sealer? A glossy brick sealer is a substance that keeps bricks from absorbing moisture. Bricks may be made of clay, concrete, ceramic, stone, or other materials. These materials’ deterioration over time exposes them to the elements, causing water to seep into the bricks and cause cracks and fractures in the bricks.

A brick sealant is used to protect the built surface from water damage. This brick wall sealer provides a water-repellent coating on top of the wall. This protects the structural integrity and appearance of the bricks by stopping dampness from entering your home. It may be clear or translucent, covering the tops of the bricks or penetrating into their pores, and it’s considered to be the finest brick sealer. You won’t even notice it, but it will prevent moisture from entering your house.

The benefits of using gloss brick sealer

• Repels water and protects from oil, gasoline, grease, salts, acids, household chemicals, food stains.
• After installation, stone or brick pavers may be sealed and protected from UV damage and fading.
• Enhance the pavers by layering them with a wet style, gleam, or both.
• Between each stone, solidify or stabilise the jointing sand.

How to apply gloss brick sealer

Bricks that have not been sealed will eventually become discoloured and filthy, especially if they are placed in a high-traffic location or near a fireplace. Cleaning the bricks will remove much of the filth, making them appear brand new once again. They will, however, require a protective coating to maintain that condition. Using a high-gloss sealant may produce the desired glossy, wet look.

1. Dust and debris should be removed using a wire brush or a broom, then water them. Give them an intense wash after that. If soot has built up on the bricks from a fireplace, add a few drops of dish soap to the rinse water if necessary. If the soot is tough to remove, sand it carefully instead of attempting to wipe it away immediately.

2. Choose between two types of mixtures, water-based or oil-based. The oil-based dries faster, but the scent is pungent and paints thinner is required for cleanup. Drying time with a water-based combination is longer. You don’t have to worry about the smell, and all you need is soap and water to clean it up.

3. Seal the bricks in a flat-bed sprayer or with a paint roller if necessary. If possible, coat the bricks uniformly using a roller in one direction. The surface of the brick should be fully coated with sealant. Apply insufficiently, and the sealant will not adhere correctly.

4. Allow at least a half-hour for the first coat to dry fully before applying a second coat. When it comes to laying the sealant, don’t worry about air bubbles. The majority will disappear after the first application if it was applied thickly enough. Apply the sealant in the same way as you did with the first coat; run the roller in the opposite direction. The wet look of the bricks will be deeper with this second layer.

5. Allow for at least seven days for the sealant to cure before placing anything on top of it.

Gloss brick sealers are available on the market today

Many popular concrete brick sealers are available, and we have a variety of speciality sealers. Please contact us to learn more about our extensive range of speciality sealer offerings

Over years of service, a contractor’s favourite! Australian Slate-Crete Supplies offers a complete line of sealers and maintenance care products:

• Concrete Hardeners
• Concrete Sealers
• Exposed Aggregate Supplies
• Spay-On Concrete Supplies
• Hand Tools
• Stencils
• Acid and Cleaning Chemicals
• Power Tools, Equipment and Supplies
• Boots and Personal Safety Supplies
• Foam Joint
• Site Preparation Supplies
• Plumbing Supplies
• Bricklayer Supplies

Australian Slate-Crete supplies are one of the most popular names when it comes to brick sealing evaluations. This product may be used on a wide range of surfaces to prevent water damage. It can be used on masonry, brick, decks, concrete, fences, and other materials. Because this substance dries to a completely transparent finish, it’s simple to apply over any surface without disturbing the visual appeal.

Finding the ideal brick sealer for your job may appear to be a difficult process because there are so many various alternatives. We’ve collected some of the best-performing products when it comes to sealing brickwork in order to save you time. Below are our brick sealer reviews.

Tips for maintaining your gloss brick sealer finish

You’ll almost never go without a clear brick sealer. Different choices, on the other hand, provide varied textures and sheens. Some chemicals appear to be totally covered in masonry and yet are not. Some goods give the appearance of being glossy, wet. Some are matte, while others are shiny; and some form a visible transparent film. Make sure you know what kind of finish it will have and whether or not it matches your surface.