Concrete Sealers

Concrete Sealers

Concrete Sealers should be applied to concrete surfaces to protect them from surface damage, corrosion and staining.  They make concrete surfaces easier to maintain and extends the life of your concrete.

Concrete Sealers (also referred to as Paving Paints) are available as a CLEAR sealer to protect and enhance coloured concrete and exposed aggregate or as a COLOURED sealer to enable a fresh new look to be achieved or to hide stains in old concrete.  Concrete Sealers are available using the latest waterbased technology, as well as traditional solvent based acrylics, waterbased epoxy and water repellent penetrating sealers.

Product / Property
Type Waterbased
Wet Look and Natural Look
Solvent Bsed Acrylic Waterbased

2-Pack Epoxy

Penetrating

Sealer

Sodium

Silicate

Available in Clear
–      colour enhancing
–     natural effect
Yes
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
Available in Colours

–      standard range

–     custom colours

 

Yes

No

 

Yes

Yes

 

Yes

No

 

No

No

 

No

No

Pack Sizes 5L and 15L 4L, 10L and 20L 10L kit, 25L kit 1L, 4L and 20L 15L / 20kg
Special Solvents required No Yes No No No
Low VOC Yes No Yes Yes/No Yes
Low Odour Yes No Yes Yes/No Yes
Flammable No Yes No Yes/No No
Clean-up Water Solvent Water Water Water
 

Application

Roller Yes Yes Yes Yes Yes
Brush/Broom Yes Yes Yes Yes Yes
Spray (low pressure) Yes Yes No Yes Yes
Spray (high pressure) No No Yes No No
Application on damp surfaces Yes No! Yes No Yes
Coats required for best results 2 2 2 2 2
Typical Coverage

* one coat

* depends on porosity and texture

35-40m² / 5L

100-120m² /15L

12-16m² / 4L

30-40m² /10L

60-80m² /20L

80-90m² /10L

200-220m²/25L

3-6 m² / 1L

12-24m² / 4L

60-120m² /20L

 

up to 200m²/15L

 

Suitable for

Interior Yes Yes Yes Yes Yes
Exterior Yes Yes No Yes No
Concrete – Plain Yes Yes Yes Yes Yes
Concrete – Coloured Yes Yes Yes Yes Yes
Concrete – Stencilled Yes Yes Yes Yes Yes
Concrete – Stamped Yes Yes Yes Yes Yes
Concrete – Exposed Yes Yes No Yes No
Pavers Yes Yes Yes Yes Yes
Sandstone Yes Yes Yes Yes No
Bluestone Yes Yes Yes Yes No
Slate Yes Yes Yes Yes No
Driveways Yes Yes No Yes No
Patios and pathways Yes Yes Interior only Yes No
Garages and workshops Yes Yes Yes Yes Yes
Domestic Yes Yes Yes Yes Yes
Swimming Pool surrounds Yes

(with anti-slip additive)

Yes

(with anti-slip additive)

Interior only

(with anti-slip additive)

Yes No
Industrial Yes Yes Yes Yes Yes
Public spaces Yes Yes Interior only Yes Yes

i-Chem WETLOOK™ sealer is a waterborne, high performance coating system developed to provide exceptional protection and colour enhancement of decorative concrete and masonry surfaces.  WETLOOK sealer is especially formulated for exposed aggregate, decorative concrete and other porous inorganic and mineralized surfaces such as concrete, and natural and synthetic masonry.

FEATURES & BENEFITS

  • enhances colour
  • easy-to-maintain surface finish
  • non-toxic
  • very low odour
  • very low VOC content (<5g/L)
  • zero hazardous air pollutants (HAP)
  • environmentally friendly
  • water wash-up
  • non-flammable
  • UV resistant
  • can be applied on damp concrete
  • suitable for interior and exterior use

SUGGESTED USES
Suitable for use on concrete, natural and synthetic masonry.

  • exposed aggregate, clay and concrete pavers, masonry, sandstone, stencil and slate impression pattern paving, and brickwork.
  • exterior driveways, car parks, pavements, pavers, patios, overlays.
  • interior residential, commercial, and light industrial factory and warehouse floors.

COVERAGE
Approximately:
6-8 m²/L      on porous surfaces
7-9 m²/L      per coat on sealed surfaces

i-Chem NATURAL LOOK sealer is a high performance self-crosslinking waterborne acrylic coating which provides a long-lasting protective and decorative seal for concrete and masonry.  Suitable for use on new and old concrete.  NATURAL LOOK sealer is available in clear and can be coloured by easy addition of WB COLOUR TINT to achieve a range of standard colours.

FEATURES & BENEFITS

  • as a clear coating, maintains natural look of surface
  • low VOC (<40g/L)
  • low odour
  • water wash-up
  • non-flammable
  • fast dry time – fast recoat & few concerns for rain
  • excellent adhesion – leads to long lasting, attractive coatings
  • excellent UV resistance and weather resistance.
  • excellent resistance to yellowing.
  • excellent resistance to common chemicals
  • protects surfaces from the spillage of food, grease and oil.
  • available in clear and a range of colours

SUGGESTED USES

  • suitable for use on concrete, bricks, pattern paving, pebble finishes (including exposed aggregate pavements), clay pavers, masonry, sandstone, slate, and unglazed tiles,
  • exterior driveways, car parks, pavements, pavers, patios, overlays.
  • interior residential, commercial, and light industrial factory and warehouse floors.

COVERAGE
Approximately
6-8 m²/L      on porous surfaces
7-9 m²/L      per coat on sealed surfaces

i-Chem WB COLOUR TINTER is designed to be added to i-Chem NATURAL LOOK sealer to achieve a long-lasting protective and decorative coating for concrete and masonry.

WB COLOUR TINTER is made using non-fading oxide pigments and are available in a standard range of 28 popular colours, as well as high-visibility colours for safety line-marking.

WB COLOUR TINTER is packed in pre-measured containers for easy stir-in addition to 15L i-Chem NATURAL LOOK sealer for optimum coverage and application.

Asc Concrete Sealer is a solvent based acrylic coating which provides a long-lasting protective and decorative seal for concrete and masonry.  Suitable for use on new and old concrete.  CONCRETE SEALER is available in CLEAR, HIGH GLOSS and COLOURED.

FEATURES & BENEFITS

  • as a clear coating, maintains natural look of surface
  • solvent wash-up
  • fast dry time – fast recoat & few concerns for rain
  • excellent adhesion – leads to long lasting, attractive coatings
  • excellent UV resistance and weather resistance.
  • excellent resistance to yellowing.
  • Resists ance to common chemicals
  • protects surfaces from the spillage of food, grease and oil.
  • available in clear and a range of colours

SUGGESTED USES

  • suitable for use on concrete, bricks, pattern paving, pebble finishes (including exposed aggregate pavements), clay pavers, masonry, sandstone, slate, and unglazed tiles,
  • exterior driveways, car parks, pavements, pavers, patios, overlays.
  • interior residential, commercial, and light industrial factory and warehouse floors.

COVERAGE
Approximately

3-4 m²/L      on porous surfaces
3-5 m²/L      per coat on sealed surfaces
1 x 20L drum typically does 60m² on exposed aggregate up to 80m² on stipple and smooth concrete.

AQUEPOXY is a solvent based acrylic coating which provides a long-lasting protective and decorative seal for concrete and masonry.  Suitable for use on new and old concrete.  CONCRETE SEALER is available in CLEAR, HIGH GLOSS and COLOURED.

FEATURES & BENEFITS

  • as a clear coating, maintains natural look of surface
  • solvent wash-up
  • fast dry time – fast recoat & few concerns for rain
  • excellent adhesion – leads to long lasting, attractive coatings
  • excellent UV resistance and weather resistance.
  • excellent resistance to yellowing.
  • Resists ance to common chemicals
  • protects surfaces from the spillage of food, grease and oil.
  • available in clear and a range of colours

SUGGESTED USES

  • suitable for use on concrete, bricks, pattern paving, pebble finishes (including exposed aggregate pavements), clay pavers, masonry, sandstone, slate, and unglazed tiles,
  • exterior driveways, car parks, pavements, pavers, patios, overlays.
  • interior residential, commercial, and light industrial factory and warehouse floors.

COVERAGE
Approximately
6-8 m²/L      on porous surfaces
7-9 m²/L      per coat on sealed surfaces

MITEQ is a solvent based acrylic coating which provides a long-lasting protective and decorative seal for concrete and masonry.  Suitable for use on new and old concrete.  CONCRETE SEALER is available in CLEAR, HIGH GLOSS and COLOURED.

FEATURES & BENEFITS

  • as a clear coating, maintains natural look of surface
  • solvent wash-up
  • fast dry time – fast recoat & few concerns for rain
  • excellent adhesion – leads to long lasting, attractive coatings
  • excellent UV resistance and weather resistance.
  • excellent resistance to yellowing.
  • Resists ance to common chemicals
  • protects surfaces from the spillage of food, grease and oil.
  • available in clear and a range of colours

SUGGESTED USES

  • suitable for use on concrete, bricks, pattern paving, pebble finishes (including exposed aggregate pavements), clay pavers, masonry, sandstone, slate, and unglazed tiles,
  • exterior driveways, car parks, pavements, pavers, patios, overlays.
  • interior residential, commercial, and light industrial factory and warehouse floors.

COVERAGE

Approximately
6-8 m²/L      on porous surfaces
7-9 m²/L      per coat on sealed surfaces

Sodium Silicate is a solvent based acrylic coating which provides a long-lasting protective and decorative seal for concrete and masonry.  Suitable for use on new and old concrete.  CONCRETE SEALER is available in CLEAR, HIGH GLOSS and COLOURED.

FEATURES & BENEFITS

  • enhances colour
  • easy-to-maintain surface finish
  • non-toxic
  • very low odour
  • very low VOC content (<5g/L)
  • zero hazardous air pollutants (HAP)
  • environmentally friendly
  • water wash-up
  • non-flammable
  • UV resistant
  • can be applied on damp concrete
  • suitable for interior and exterior use

SUGGESTED USES

Suitable for use on concrete, natural and synthetic masonry.

  • exposed aggregate, clay and concrete pavers, masonry, sandstone, stencil and slate impression pattern paving, and brickwork.
  • exterior driveways, car parks, pavements, pavers, patios, overlays.
  • interior residential, commercial, and light industrial factory and warehouse floors.

COVERAGE
Approximately
6-8 m²/L      on porous surfaces
7-9 m²/L      per coat on sealed surfaces

Send